Stop searching, start finding

Have you ever spent twenty minutes scrolling through a 140-page PDF just to find a cable number? Or opened a CAD file that takes forever to load, only to realize the drawing is from before the last renovation? That’s wasted time. Not just a little, but a lot. And in this line of work, time wasted searching is time not spent solving the real problem.

Zonedge is based on a simple premise: the information is already there in your network. What’s missing is a way to find it quickly.

Trace a fiber from end to end and locate a break in just a few clicks

When an alarm goes off at 6:30 a.m. on a Tuesday morning and a customer calls to report a service outage, the last thing you need is to be mentally mapping out a network diagram. You want to know where the problem is. Right now.

With Zonedge, you can trace a fiber end-to-end directly on the map. You see the entire path: every segment, every splice case, every junction point, without having to open five different files to reconstruct the route. And when you take your OTDR reading in the field, you enter the value into Zonedge, and the system finds and pinpoints the exact location of the fault. You no longer interpret; you act.

It's the difference between simply looking up a street in a road atlas and entering the full address into your GPS.

Finding without knowing how to search

Not everyone works with the same information. A technician thinks in terms of pole numbers. A manager thinks in terms of street addresses. A planner thinks in terms of cable or segment names. Zonedge doesn’t require you to learn a query language: you just type in what you know, and the platform finds what you’re looking for.

A pole number, an equipment name, an address on King Street in Sherbrooke, a cable name: any entry point works. It’s the kind of tool you can explain to a new technician in thirty seconds, and they’ll be using it effectively from day one.

But a simple search is just the starting point.

Queries that work for you

Zonedge lets you create saved queries: searches that you set up once and can access on demand for the whole team. And that’s where the possibilities really take off.

Want to see all the cables currently under construction in a specific municipality? This query combines two criteria: a geographic filter based on spatial intersection and a filter based on lifecycle status. One click, and you have the list. Want a statistical overview of your network capacity, the length of cable per service sector, or the number of available versus used PON ports in a given area? Same logic. The query does the math; you read the result. On the administrative side, you can generate a list of all poles for which you hold an attachment permit, useful when a pole owner asks for a status update or when it’s time to renew agreements.

These queries aren't static reports. They're dynamic tools that you can run whenever you need them, with results that reflect the current state of your network.

And if you want to take it a step further, Zonedge offers what are called dynamic parameter queries. The idea is that you build the query once, but leave certain criteria open. When a user launches the search, Zonedge displays a dialog box asking them to enter the missing values. For example, a query to find all utility poles belonging to a specific owner in a given municipality: you configure the structure once, check the variable criteria, and each time the query runs, the platform asks for the owner’s name and the municipality’s name. The administrator sets up the complex logic. Any team member can use it without needing to understand how it works under the hood. A single query replaces what would have been a dozen different variations.

See the network the way you need to see it

There’s a principle in cartography that applies directly here: a picture is worth a thousand words. But it has to be the right picture, and that depends on who’s looking at it.

Zonedge lets you build custom thematic maps where network data is visually represented based on what matters to you. The planning manager wants to see the areas where available capacity is below the critical threshold: he colors the map accordingly. The maintenance manager wants to quickly identify equipment nearing the end of its useful life; he has his own view. The contract manager wants to see which assets belong to which customer in a given sector: he builds his own map. The engineer planning a network expansion to Hawkesbury wants to see the segments that have never had a reference OTDR trace: he filters and colors that specific criterion.

The physical map of the network is the same for everyone. What changes is the lens. Each user configures their own view based on their responsibilities, and what they see provides them with exactly the information they need, without having to sift through information they don't need.

That’s the real difference between a network map and a digital twin. With a map, you have to look for the information. With a digital twin, you ask it a question, and it answers you.

Less time wasted, more time for what matters

Ultimately, that’s what makes the difference: you spend less time searching and more time taking action. Smart navigation isn’t just a nice-to-have. It’s the foundation of a platform that saves you hours every week, hours you can devote to onboarding new clients, preventive maintenance, or simply to projects that drive the network forward.

When everything is easy to find, you do better. It's as simple as that. 

Request a demo!